P = 44.05
E = 15.49
12600 DPI

Choice of:

MA-2 3DL 600L Mainsail $7,300
Using all Aramid threads and a twisty profile with a flat bottom section, the 600M mainsail will perform well in many conditions.

MC-2 3DL 800L Carbon (recommended) $10,165
Using all carbon threads and a more versatile, user-friendly shape, this latest edition has produced results in a variety of conditions. The overall shape of the 800L main still features a twisty profile, but with a fuller bottom section when compared to the 600M Mainsail.

FEATURES:

» 2 Full Battens, 3 Leech Battens
» Choice of colored sail numbers and draft stripes (blue, green, red, and black)
» Kevlar spreader patches
» Reinforced reef points
» Kevlar reinforced head, clew and tack patches
» North Sails sail ties
» High quality North Sails mainsail roll bag
» Leech telltales
» Spreader & vision windows
» Velcro clew strap
» Internal Batten pockets for smoother tacks and gybes
» IRC Certificate

All Melges 32 Headsails are equipped with the following:

MELGES 32 LIGHt HEADSAILS

I = 40.86
J = 10.7
8820 DPI

With a lower thread count when compared to the Medium or Heavy jibs, the Light jib can be carried in up to 10 knots for a combination of finesse and speed that is needed for light air racing.

Choice of:

105% LB-2 3DL 860M Light Carbon/Aramid $3,900
105% LC-2 3DL 800L Light Carbon (recommended) $4,550

MELGES 32 MEDIUM HEADSAILS

I = 40.86
J = 10.7
16800 DPI

This sail features a sail area that is similar to the Light jib but has a higher thread count for increased durability and a flatter, more draft forward, shape for better performance in stronger wind. Designed for a breeze range of 7-22 knots, this sail is ultra fast in both flat water and big wave venues.

Choice of:

105% MB-2 3DL 860M Med/Heavy Carbon/Aramid $4,369
105% MC-2 3DL 800L Medium/Heavy Carbon (recommended) $5,112

MELGES 32 HeAVY HEADSAILS

I = 40.86
J = 10.7
19600 DPI

When the breeze is really howling, and you need to reduce sail area to keep the boat on its feet, our heavy jib is the answer. This sail features a smaller sail area than the Light or Medium jibs, yet it still provides the performance and handling you need in One-Design racing.

Choice of:

#4 HB-2 3DL 860M Carbon/Aramid $3,720
#4 HC-2 3DL 800L Carbon (recommended) $4,360

A3
(Formerly Max-Runner Code 2A-3)
Sail Area - 1,337 sq feet
AirX 650 or Contender Superkote $5,185
Contender Dynalite $5,965
(note: numbers/graphics will not stick to Dynalite sail cloth)

The A3 is our largest spinnaker in terms of sail area and is the ideal selection for when sailing in the dead down wind mode. Built to the maximum mid-girth, this sail is perfect for the 7-13 wind range in either flat or choppy conditions.

A2
(Formerly AP Runner/Reacher Code 2A)
Sail Area - 1,302 sq feet
AirX 650 or Contender Superkote $5,185
Contender Dynalite $5,807
(note: numbers/graphics will not stick to Dynalite sail cloth)

With a flatter profile and smaller sail area than the A3, this sail performs very well in lighter conditions or when the 32 wants to get up and plane. Designed and geared for a more apparent wind forward position, the A2 is simply the best performing spinnaker on the market. Ideal for wind ranges 4-8 and 13-25.

-Melges 32 Class Rule allow for 2 spinnakers to be carried on the boat while racing. North Sails recommends the A3 and A2 as the primary spinnakers to be used for One Design Racing.

A1
(Formerly Small Reacher 1A/3A)
Sail Area - 1,184 sq feet
AirX 650 or Contender Superkote $5,005
Contender Dynalite $5,309
(note: numbers/graphics will not stick to Dynalite sail cloth)

This sail was originally used for light/heavy air conditions in Melges 32 racing, but was found to be a bit small for buoy and One Design Racing. This sail is ideal when the breeze is very light, or when the breeze is really pumping and extra stability and control are desired.

Code Zero Reacher
Sail Area - 774 sq feet
1.7 NorLam
$5,430

The ultimate sail for PHRF racing! The Code 0 is the sail to have when you need to sail tighter angles. This sail really excels in light to moderate conditions. Available in white only.

Harry Melges (left, top) and Daniele Cassinari (left, bottom) are the Melges 32 Class Leaders for the Class Development Program (CDP). Both Harry and Daniele are experienced Melges 32 specialists, and they can make your boat faster and more fun!

Harry is your American Melges 32 Class Leader, and Daniele is your European Class Leader. Browse through the website and if you have any questions feel free to email Harry or Daniele. They can also help you find your local Melges 32 expert, so contact Harry or Daniele today!